Display Setting; Audio Setting - Magnavox DV225MG9 Owner's Manual

B

DISPLAY Setting

You can change the display functions. Follow steps 1 to 3 in the "CUSTOM Menu" section on page 20.
4
Select the desired item.
or
DISPLAY menu
SETUP DISPLAY
TV ASPECT 4:3 LETTER BOX
STILL MODE AUTO
PROGRESSIVE OFF
Note:
PROGRESSIVE:
• You can set "PROGRESSIVE" to
"OFF" in "DISPLAY" menu or press
and hold [PLAY B] on this unit
on the DVD side for more than
5 seconds during playback until
the P-SCAN indicator on this unit
turns off.
• When "PROGRESSIVE" is "ON",
video signals from the unit's
VIDEO OUT and S-VIDEO OUT
jacks will be distorted or not be
output at all.
Note:
• In "QUICK" menu, "PLAYER
MENU", "TV ASPECT",
"PROGRESSIVE" or "DOLBY
DIGITAL" are available. "QUICK"
menu consists of the setting
menu frequently used, and they
are accompanied with QUICK .
You can make all settings in
"CUSTOM" menu.
C

AUDIO Setting

Choose the appropriate audio setting for your device. It only affects during the playback of DVD discs. Follow steps 1 to 3 in the
"CUSTOM Menu" section on page 20.
4
Select the desired item.
or
AUDIO menu
SETUP AUDIO
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
Note:
• In "QUICK" menu, "PLAYER
MENU", "TV ASPECT",
"PROGRESSIVE" or "DOLBY
DIGITAL" are available. "QUICK"
menu consists of the setting
menu frequently used, and they
are accompanied with .
QUICK
You can make all settings in
"CUSTOM" menu.
EN
5
TV ASPECT:
QUICK
(Default: 4:3 LETTER BOX)
See note on the right.
TV ASPECT
TV ASPECT 4:3 LETTER BOX
4:3 LETTER BOX
STILL MODE AUTO
4:3 PAN & SCAN
PROGRESSIVE OFF
16:9 WIDE
OK
STILL MODE:
(Default: AUTO)
See note on the right.
STILL MODE
TV ASPECT 4:3 LETTER BOX
AUTO
STILL MODE AUTO
FIELD
PROGRESSIVE OFF
FRAME
OK
PROGRESSIVE:
QUICK
(Default: OFF)
See note on the left.
TV ASPECT 4:3 LETTER BOX 4:3 LETTER BOX
STILL MODE AUTO
AUTO
PROGRESSIVE OFF ON
OK
If there is no picture
Before proceeding...
or you do not press
1. Make sure your TV has progressive scan.
2. Connect with component video cable
any buttons for 15
NOTE: If there is no picture or picture is
distorted after selecting 'YES',
wait about 15 seconds for auto recovery.
seconds, "PROGRES-
A ct iva t e P ro gre ssi ve ?
SIVE" will switch to
SELECT: K / L
"OFF" and it will exit
"SETUP" menu.
Confirm again to use progressive scan.
If Picture is good, select 'YES'.
SELECT: K / L
5
DRC (Dynamic Range Control):
(Default: ON)
Set to "ON" to compress the range between soft and loud sounds.
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
OK
DOWN SAMPLING:
(Default: ON)
Set to "ON" when outputting in 48kHz.
Set to "OFF" when outputting the original sound.
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
OK
DOLBY DIGITAL:
QUICK
(Default: BITSTREAM)
Set to "BITSTREAM" when the unit is connected to a Dolby Digital decoder.
• BITSTREAM: outputs Dolby Digital signals.
• PCM: converts the Dolby Digital into PCM (2 channel).
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
OK
– 21 –
Select the
desired
setting.
OK
or
Select the
desired
setting.
OK
or
SETUP
Select "Yes".
or
NO
YES
SET:OK
OK
Select "Yes".
or
NO NO
YES YES
SET:OK
OFF
ON
BITSTREAM
ON
OFF
BITSTREAM
ON
ON
PCM
6
To exit "TV ASPECT" or "STILL
MODE" menu
SETUP
To complete
"PROGRESSIVE" setting
OK
Note:
TV ASPECT:
• Select "4:3 LETTER BOX", so
that black bars may appear
on the top and bottom of the
TV screen.
• Select "4:3 PAN & SCAN" for a
full height picture with both
sides adjusted.
• Select "16:9 WIDE" if a wide-
screen TV is connected to
this unit.
STILL MODE:
• Select "AUTO" usually.
• If you select "AUTO", it
automatically selects the
best resolution setting
("FRAME" or "FIELD") based
on the data characteristics of
the pictures. (default)
• If you select "FIELD", the
picture in the still mode will
be stabilized.
• If you select "FRAME", the
picture in the still mode will
be highly defined.
• An individual picture on
the TV screen is called a
"frame", which consists of
two separate images called
as "field".
• Some pictures may be
blurred if you select "AUTO"
in the still mode due to their
data characteristics.
6
To exit the menu
SETUP
Note:
DRC:
• This function is available
only on the discs which are
recorded in the Dolby Digital
format.
DOWN SAMPLING:
• When playing back a 96kHz
disc with the copyright
protection, or when virtual
surround is set to "1" or "2",
the sound will be down
sampled at 48kHz even if the
"DOWN SAMPLING" is set to
"OFF".
• This function is available only
on digital outputting of a disc
recorded in 96kHz.