Auto Repeat; Recording; Recording & One-Touch Timer Recording (Otr); Timer Recording - Magnavox DV225MG9 Owner's Manual

Auto Repeat

When "AUTO REPEAT" is set to "ON", the cassette tape will automatically rewind and start over when it reaches the end.
This will continue until auto repeat function is turned off.
VCR VCR
1 Press [SETUP], and choose "AUTO REPEAT".
SETUP
Note:
• The auto repeat function can also be set "ON" or "OFF" by pressing [REPEAT] on the remote control.
• To cancel auto repeat function, follow step 1 above. Then, press [B] so that "OFF" appears beside "AUTO REPEAT". Press [SETUP] to exit.
• The auto repeat playback will start automatically if you select "AUTO REPEAT" to "ON" in the stop mode.

Recording

This unit has no tuner system so it cannot receive TV broadcasts without external
tuner or such devices.
Note:
• You can also set to external tuner. Refer to "Satellite Link" on page 14.
Recording & One-touch Timer Recording (OTR)
VCR VCR
1 Insert a recordable 2
cassette tape.
3 Press [SPEED] to select the desired tape speed.
SPEED
Tape speed
Type of tape
SP mode
SP SLP mode
4 Press [RECORD] until desired recording time is selected.
RECORD
REC
(normal recording)
OTR (8:00)
REC
5 Press [STOP C] to 6
stop recording.
STOP
You CANNOT dub a DVD to a video cassette tape.

Timer Recording

• Insert a recordable cassette tape.
VCR VCR
• Make sure to turn on the external
tuner.
1 Press [SETUP]. Select "TIMER PROGRAMMING".
B TIMER PROGRAMMING
SETUP
- M E N U -
TIMER PROGRAMMING
SATELLITE LINK
B AUTO REPEAT
CLOCK SET
LANGUAGE SELECT
or
Press [INPUT] until "L1" or "L2" is
displayed on the TV screen. Select "L1"
to activate rear input jacks. Select "L2"
to activate front input jacks.
INPUT
See note on the right.
Recording / playback time
T60 T120 T160
1hour 2hours 2-2/3hours
3hours 6hours 8hours
OTR (0:30) OTR (1:00).....
OTR (7:30)
Press [OPEN/CLOSE A] to eject the
recorded cassette tape.
OPEN/CLOSE
- M E N U - TIMER PROGRAMMING
PROG 12345678
SATELLITE LINK
DATE
AUTO REPEAT [OFF]
START TIME
CLOCK SET
END TIME
LANGUAGE SELECT
L1/L2
REC SPEED
Available program number flashes.
2
Press [B] to "AUTO REPEAT" to set "ON" or "OFF".
[OFF]
Press [SETUP] to exit.
STANDBY-ON
y
POWER ON
VIDEO - AUDIO -
L R
h D
REW F.FWD STOP/EJECT PLAY RECORD
5
To stop recording temporarily (pause mode)
Press [PAUSE F].
• During the recording in pause mode, 5 C marks appear on the
TV screen. Each C mark represents 1 minute.
• Press it again to resume recording.
• Pause mode will be automatically canceled after 5 minutes to
prevent damage to the cassette tape and the video head.
Note:
• Do not change the external tuner's channel while you are recording.
You CANNOT watch one channel and record another at the same time.
• Connect your external tuner to the L1 (rear panel) jacks of the unit.
Connect camcorders and other such devices to the L2 (front panel)
jacks. Refer to page 7, 9.
Accidental Erasure Prevention
To prevent accidental recording, remove erase-
protection tab of the cassette tape. To record
on it later, cover the hole with adhesive tape.
2 Select an empty program number.
Then press [B] to go to next step.
or
– 12 –
B AUTO REPEAT
TV this unit external tuner
6
STANDBY-ON
3
1
4
2
7
CLEAR
REC TIMER REC
DISPLAY
IR
C B I
5
RECORD
6 4 1
4
erase-protection tab
PROGRAM NUMBER 1
DATE
START
END
L1/L2
REC
- M E N U -
TIMER PROGRAMMING
SATELLITE LINK
[ON]
CLOCK SET
LANGUAGE SELECT
OPEN/CLOSE
SPEED TIMER SET
2 3
TRACKING
5 6
8 9
INPUT
0 +10
VCR DVD MODE
PLAY
STOP
PREV NEXT PAUSE
– – / – –
TIME – – : – – – –
TIME – – : – – – –
– –
SPEED – –
EN