Install the access panel
Ensure that the access panel latch is in the open position.
1.
Align the hole in the access panel latch with the guide pin on the chassis.
2.
Close the access panel latch. The access panel slides to a closed position.
3.
Use a T-15 Torx screwdriver to tighten the access panel latch screw.
4.
Remove the PCI riser cages
WARNING:
internal system components to cool before touching them.
CAUTION:
disconnect all power cords before removing or installing the PCI riser cage.
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To prevent damage to the server or expansion boards, power down the server, and
Operations 26