Camera Wi-Fi Setup - Swann ads 440 Instruction Manual

Camera Wi-Fi Setup

So, you've got the camera installed and successfully accessed it via the network but you
don't want that cable running down the hallway? Time to enjoy the flexibility of wireless.
Setting up the camera with your Wi-Fi network is easier than you might think!
Before starting, ensure the camera has the Wi-Fi antenna attached and is within range of your
wireless home network. Also, it'll be good to have your network name and password ready.
Connecting to the Wi-Fi Network
1
On the Live View interface, select the camera that you want to access wirelessly and
then click the
window.
2 Click Remote Settings.
camera and display the Remote Settings window.
3 Click Manage WiFi Network. In the Manage WiFi Network window that appears,
you will see a list (WiFi SSID) of available wireless networks which the camera has
automatically detected. When you select a wireless network, you can see its encryption
type and signal strength.
4 In the list of available wireless networks (WiFi SSID), select a network, enter the Wi-Fi
password (also commonly known as network security key) and then click OK. If there's
any other wireless networks in your area that you want the camera to connect to,
simply repeat steps 3 and 4.
Camera Settings button. This displays the Edit Device Information
Wait a few seconds for your PC to establish connection with the
8