Accessing The Camera Via Web Browser; The Live View Interface - Swann ads 440 Instruction Manual

Accessing the Camera via Web Browser

• Open a web browser such as Internet Explorer (IE), Chrome, Firefox or Safari
and enter the IP address of your camera in the address bar. Make sure your
camera is connected to the network, otherwise nothing will show up.
To find out the IP address of your camera, refer to the quick summary in "Adding to
the Camera List" on page 7.
• Log in using the current username and password of your camera (the default is
admin / 123456).
• Next, select your viewing mode - Mode 1 for Internet Explorer or Mode 2 for
Chrome, Firefox and Safari. Note that certain functions are only available in
Internet Explorer.
• If you're using IE and connecting to a camera for the first time, you will need to
download and install a plug-in first. The IE browser plug-in is quite small and
installation does not take long. Your operating system and/or virus protection
program may ask you for permission to run the file. Select the relevant options
available to complete installation. Restart your browser after installation.

The Live View Interface

The Live View interface on the web browser is almost exactly the same as the main
interface for the SwannEye Plus software on the computer - it just looks slightly
different but operates in the same manner with a few additional features such as
vertical & horizontal patrolling and brightness & contrast adjustments.
14