About the Camera Congratulations on your purchase of this ADS-120 from Swann! You’ve chosen a great little self contained, easy to install entry-level CCTV camera. This manual will walk you through positioning, installing, connecting and using your camera, and offer some tips to help you get the most out of your security monitoring system.
Page 3
Choosing a Location The ADS-120 can be mounted just about anywhere indoors, provided there is some protection against direct sunlight. Some of the things you’ll have to consider when choosing a location are: • What you want to monitor, and where you’ll get the best view of it. •...
Page 4
About the Camera Connect the provided Audio / Video cable into the connection located at the back of the ADS-120. Do not force the cable as it can only be inserted into the connection the one way. Be careful not to bend the pins inside the connection.
Page 5
Connect provided power adapter to the DC input located on the cable. Plug the power adapter into a wall socket. Connecting to your existing DVR Connecting directly to your TV As most DVRs have BNC sockets, your DVR Connect the yellow and red RCA connections should have been provided with a BNC to to the video and audio input on your TV.
Troubleshooting Problem: I don’t see an image on the TV or the DVR. Solution: Check that you have the audio / video cable connected correctly into the connection located at the back of the ADS-120. Check that you have connected the yellow RCA connection to the correct input on the TV.
Technical Specifications Technical Specifications Video Image Sensor SwannTruColor (STC) Video Quality 520 TV Lines Effective Pixels NTSC & PAL: 640 x 480 Min. Illumination 1 Lux Day/Night Mode Day only White Balance Automatic Gain Control Automatic Backlight Comp. Wide Dynamic Range Lens 3.6mm F2.2 Viewing Angle...
Any unit which proves defective during the stated period will be repaired without charge for parts or labour or replaced at the sole discretion of Swann. The end user is responsible for all freight charges incurred to send the product to Swann’s repair centres. The end user is responsible for all shipping costs incurred when shipping from and to any country other than the country of origin.