Wds Bridge Mode - EnGenius ENH1750EXT User Manual

WDS Bridge Mode

In WDS Bridge Mode, the ENH1750EXT can wirelessly connect different LANs by configuring the MAC address and
security settings of each ENH1750EXT device. Use this mode when two wired LANs located a small distance apart want
to communicate with each other. The best solution is to use the ENH1750EXT to wirelessly connect two wired LANs, as
shown in the following diagram. WDS Bridge Mode can establish up to four (4) WDS links, creating a star-like network.
Note: WDS Bridge Mode does not act as an Access Point. Access Points linked by WDS are using the same frequency
channel. More Access Points connected together may lower throughput. This configuration can be susceptible to
generate endless network loops in your network, so it is recommended to enable the Spanning Tree feature to prevent
this from happening.
ENH1750EXT
WDS Bridge
Client
Computer
ENH1750EXT
WDS Bridge
ENH1750EXT
WDS Bridge
24
Client
Computer
Client
Computer