Table of Contents
Advertisement
Guest Network Settings
Adding a guest network allows visitors to use the Internet
without giving out your office or company wireless
security key. You can add a guest network to each wireless
network for both the 2.4 GHz and 5 GHz frequency bands.
SSID: Specifies the SSID for the current profile.
Suppressed SSID: Check this option to hide the selected
SSID from clients. If checked, the SSID will not appear in the
site survey.
Station Separation: Check the box to allow or prevent
communication between client devices.
IP Address: Displays the IP address of this device.
Subnet Mask: Displays the IP Subnet mask of this device.
Starting IP Address: The first IP Address in the range of
the addresses used by the DHCP server.
Ending IP Address: The last IP Address in the range of
addresses assigned by the DHCP server.
Fast Handover
Fast Handover: Enable the Fast Handover feature by
ensuring that each client is served by at least one Access
Point at any time. Access Points continuously monitor
the connectivity quality of any client in their range and
efficiently share this information with other Access Points
in the vincinity of that client to coordinate which of them
should serve the client best.
RSSI: Enter the RSSI (Received Signal Strength Index) in
order to determine the handover procedure which the
current wireless link will terminate. RSSI is an indication of
the power level being received by the antenna. Therefore,
the higher the RSSI number, the stronger the signal.
49
Advertisement
Table of Contents
