Radio Shack 43-3818 Owner's Manual page 9

base's keyhole slots with the wall plate studs
and slide the base downward to secure it.
For direct wall
mounting , align the
base's keyhole slots
with the mounting
screws and slide the
base downward to
secure it.
5. Plug the adapter into a
standard AC outlet.
6. Lift the base's antenna to a vertical position.
%
100'%6+0)
4 "
'2.#%+0)
The phone comes with a rechargeable Ni-Cd
(nickel-cadmium) battery pack installed in the
handset, but not connected. Before using your
phone, you must connect the battery pack, then
charge it for about 24 hours.
1. Press down and slide off the battery pack
compartment cover.
2. Lift the battery pack out of the compartment.
3. Plug the battery
pack's connector into
the socket in the
compartment. The
connector fits only
one way.
4. Put the battery pack
in the compartment.
5. Replace the cover.
To charge the battery pack, place the handset on
the base, face up or down. The base's CHARGE/IN
USE indicator lights.
."%
*#4)+0)
"$
6*' #66'4;
#"
" "
#0&
"2
#%-
#
"+/2146#06"
Be sure the battery pack is
properly connected before
you try to charge it. The
CHARGE/IN USE indicator
lights when the handset is
on the base even if the
battery pack is not
connected properly.
#
9