CHAUVET® assumes no responsibility or liability for any errors or omissions that may appear in this manual. CHAUVET® reserves the right to update the existing document or to create a new document to correct any errors or omissions.
Please contact the nearest authorized technical assistance center. · Keep this User Manual for future consultation. If you sell this product to another user, be sure that they also receive this document. Page 4 of 14 LED Followspot 75ST User Manual Rev. 6...
Control Panel Focus Lens Text here Adjustment Knobs Bracket Adjustment Knob Mounting Bracket Button Menu Fuse holder On/Off Switch Gel Frame Holder Iris Adjustment Power In Iris Adjustment DMX In/Out LED Followspot 75ST User Manual Rev. 6 Page 5 of 14...
Replace with a good fuse of the same type and rating. Screw the fuse holder cap back in place and reconnect power. Always replace a blown fuse of the same type and rating. LED Followspot 75ST User Manual Rev. 6 Page 7 of 14...
Before mounting this product, read and follow the safety recommendations indicated in Safety Notes section. Orientation The LED Followspot 75ST may be mounted in any position; however, make sure adequate ventilation is provided around the product. · Rigging Before deciding on a location for this product, always make sure that it will be easy to access the unit for maintenance and programming purposes.
Remove the plastic cover. Remove the gobo holder inside. Change the gobo. Replace everything in reverse order to use your chosen gobo. Iris Adjustment Knob Thumb Screw Plastic Cover LED Followspot 75ST User Manual Rev. 6 Page 9 of 14...
DMX mode uses. If you choose a starting address that is too high, you could restrict the access to some of the product’s channels. The LED Followspot 75ST uses up to 3 DMX channels in its 3-channel DMX personality, which defines the highest configurable address to 510.
Function Select In DMX mode, select Changes color of LED light output. Choose Toggles between Manual starting address. color on the menu to change to desired color. and DMX modes. LED Followspot 75ST User Manual Rev. 6 Page 11 of 14...
Gently polish the lens surfaces until they are free of haze and lint. Always dry the lens surfaces carefully after cleaning them. Do not spin the cooling fans while blowing compressed air into them. Page 12 of 14 LED Followspot 75ST User Manual Rev. 6...
Maximum External Temp. Cooling System 104 °F (40 °C) Fan-assisted I/O Connectors Connector Type Channel Range 3-pin XLR Sockets Ordering Product Name Item Code UPC Number LED Followspot 75ST 08040503 781462208554 LED Followspot 75ST User Manual Rev. 6 Page 13 of 14...
Voice: +52 (728) 285-5000 Outside the U.S., United Kingdom, Ireland, or Mexico, contact the dealer of record and follow their instructions to request support or to return a product. Visit the CHAUVET® website for contact information. Page 14 of 14...