Cleaning & Maintenance - NewAir AC-12200E Owner's Manual

Should you prefer to use the appliance without having to empty the
tank every so often, proceed as follows:

Remove the drain knob and rubber plug
and retain for future use.

Connect the drain tube supplied to the
water outlet as shown and locate the other end into a drain.

The drain tube may be extended by adding
an extension tube and using a suitable
connector.
Please note:

The drain must be at a lower level than
the drain hole on the unit.

Flashing Water Full indicator will not
function in this mode of drainage.

If you want to extend the water tube, you
can connect it with another tube (OD: 0.7" / 18mm)
CLEANING & MAINTENANCE
Always unplug the air conditioner from the outlet before cleaning.
To maximize the efficiency of the air conditioner, clean the unit regularly.
Cleaning the housing
Use a soft, damp cloth to wipe the body clean.
Never use aggressive chemicals, gasoline, detergents, chemically treated
cloths, or other cleansing solutions. These all could damage the frame.
Cleaning the filter
Use a vacuum cleaner or tap the filter lightly to remove loose dust and
dirt from the filters and then rinse thoroughly under running water (no hotter
°
than 104 C).
13
A Name You Can Count On