Step 4: Connecting Fm/Am Antennas; Step 5: Connecting The Power Cord - Magnavox mrd120 User Manual

Connections
Step 4: Connecting FM/AM
antennas
fix the claw into
the slot
1
Connect the supplied AM loop antenna
to the AM jack. Place the AM loop
antenna on a shelf or attach it to a stand
or wall.
2
Connect the supplied FM antenna to the
FM (75 ) jack. Extend the FM antenna
and fix its ends to the wall.
For better FM stereo reception, connect
an external FM antenna (not supplied.)
Helpful Hints:
– Adjust the position of the antennas for
optimal reception.
– Position the antennas as far as possible
from your TV, VCR or other radiation source
to prevent unwanted interference.
12
001-037-MRD120-37-Eng
AM
antenna
1
FM
antenna
2
12
Step 5: Connecting the
power cord
~ AC MAINS
Power Outlet
After everything is connected
properly, plug the AC power cord
into the power outlet.
Never make or change any connections
with the power switched on.
Helpful Hint:
– Refer to the type plate on the rear or
bottom of the system for identification and
supply ratings.
18/03/2004, 02:18 PM
FRONT FRONT FRONT REAR REAR SUBWOOFER
RIGHT LEFT CENTER RIGHT LEFT
8239 300 30533