Table of Contents
Advertisement
Basic Connections
Option 2: Connecting to a
Progressive Scan TV or component
video input
The progressive scan video quality is only
available when using Y Pb Pr connection
and a progressive scan TV is required. It
provides superior picture quality when
watching DVD movies.
A
Follow option 1 to make the basic video
connection.
B
Use the component video cables (red/
blue/green - not supplied) to connect the
Y P
P
jacks on the DVD system to
B
R
the corresponding component video
input jacks (or labeled as Y Pb/Cb Pr/Cr
or YUV) on the TV.
C
If your TV accepts progressive signals,
proceed to 'Getting Started - Step 5:
Setting up Progressive Scan feature' for
detailed progressive feature setup.
Helpful Hint:
– If your TV does not support Progressive
Scan, you will not be able to view the
picture. Press and hold OPEN/CLOSE button,
and press '1' to deactivate progressive scan.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
16
(continued)
fi x the claw
into the slot
Option 2
Step 4: Connecting the FM/
AM antennas
A
Connect the supplied AM loop antenna
to the AM jack. Place the AM loop
antenna on a shelf, or attach it to a stand
or wall.
B
Connect the supplied FM antenna to the
FM jack. Extend the FM antenna and fi x
its ends to the wall.
For better FM stereo reception, connect
an external FM antenna (not supplied).
Helpful Hints:
– Adjust the position of the antennas for
optimal reception.
– Position the antennas as far away as
possible from your TV, VCR or other
radiation source to prevent any unwanted
interference.
AM loop antenna
FM wire
antenna
Advertisement
Table of Contents
