Pppoe - Yealink SIP-T48G Administrator's Manual

Microsoft Lync Edition Administrator's Guide for SIP-T2_Series and T4_Series IP Phones
To configure the IP address mode via phone user interface:
1. Press Menu->Settings->Advanced Settings (default password: admin)
->Network->WAN Port.
2. Press
3. Press the Save soft key to accept the change.
The IP phone reboots automatically to make settings effective after a period of time.
To configure a static IPv4 address via phone user interface:
1. Press Menu->Settings->Advanced Settings (default password: admin)
->Network->DNS Server.
2. Enter the desired values in the Pri DNS and Sec DNS fields respectively.
3. Press the Save soft key to accept the change.
4. Press WAN Port->IPv4->Static IP Client.
5. Enter the desired values in the IPv4, Subnet Mask and Default Gateway fields
respectively.
6. Press the Save soft key to accept the change.
The IP phone reboots automatically to make settings effective after a period of time.
PPPoE (Point-to-Point Protocol over Ethernet) is a network protocol used by Internet
Service Providers (ISPs) to provide Digital Subscriber Line (DSL) high speed Internet
services. PPPoE allows an office or building-full of users to share a common DSL
connection to the Internet. PPPoE connection is supported by the IP phone Internet port.
Contact your ISP for the PPPoE user name and password.
Procedure
PPPoE can be configured using the configuration files or locally.
Configuration File
Local
40
or to select IPv4 or IPv4 & IPv6 from the IP Mode field.
<MAC>.cfg
<y0000000000xx>.cfg
Web User Interface
Configure PPPoE on the IP phone.
Parameters:
network.internet_port.type
Configure the user name and
password for PPPoE on the IP
phone.
Parameters:
network.pppoe.user
network.pppoe.password
Configure PPPoE on the IP phone.
Configure the user name and