Dhcp - Yealink SIP-T48G Administrator's Manual

DHCP (Dynamic Host Configuration Protocol) is a network protocol used to dynamically
allocate network parameters to network hosts. The automatic allocation of network
parameters to hosts eases the administrative burden of maintaining an IP network. IP
phones comply with the DHCP specifications documented in RFC 2131. If using DHCP , IP
phones connected to the network become operational without having to be manually
assigned IP addresses and additional network parameters.
Procedure
DHCP can be configured using the configuration files or locally.
Configuration File
Local
Details of Configuration Parameters:
Parameters
network.internet_port.type
Description:
Configures the Internet (WAN) port type for IPv4.

0-DHCP

1-PPPoE
2-Static IP Address
Note: It works only if the value of the parameter "network.ip_address_mode" is set to
0 (IPv4) or 2 (IPv4 & IPv6). If you change this parameter, the IP phone will reboot to
make the change take effect.
Web User Interface:
Network->Basic->IPv4 Config->DHCP/PPPoE/Static IP Address
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin) ->Network->WAN
<MAC>.cfg
Web User Interface
Phone User Interface
Permitted Values
Configure DHCP on the IP phone.
Parameter:
network.internet_port.type
Configure DHCP on the IP phone.
Navigate to:
http://<phoneIPAddress>/servlet
?p=network&q=load
Configure DHCP on the IP phone.
0, 1 or 2
Getting Started
Default
0
23