Dhcp Option 60 - Yealink SIP-T48G Administrator's Manual

vendor class ID it is configured for, the option 43 might have different values. Two
vendor class identifiers are used when deploying with the Lync server: a VLAN ID
request (vendor class ID: CPE-OCPHONE) and a certificate provisioning service URL
request (vendor class ID: MS-UC-Client). For more information, refer to
on page 30.
To use DHCP option 66 and option 43, make sure the DHCP Active feature is enabled.
Procedure
DHCP active can be configured using the configuration files or locally.
Configuration File
Local
Details of Configuration Parameters:
Parameters
auto_provision.dhcp_option.enable
Description:
Triggers the DHCP Option feature to on or off.
0-Off
1-On
If it is set to 1 (On), the IP phone will obtain the provisioning server address by
detecting DHCP options.
Web User Interface:
Settings->Auto Provision->DHCP Active
Phone User Interface:
None
To configure the DHCP active feature via web user interface:
1. Click on Settings->Auto Provision.
<y0000000000xx>.cfg
Web User Interface
Permitted Values

DHCP Option 60

Configure DHCP active.
Parameters:
auto_provision.dhcp_option.enable
Configure DHCP active.
Navigate to:
http://<phoneIPAddress>/servlet?p
=settings-autop&q=load
Default
0 or 1
Getting Started
1
29