Table of Contents
Advertisement
TRENDnet User's Guide
Start/Stop Streaming
Click this button to start or stop streaming. Select the display cell by click
on it, (The yellow frame will wrap around the selected display cell.) then
click on the icon of the stream you want. If the channel has been selected
by others, stop that streaming before you change.
Video Stream
Click this button to choose the video stream between main stream and sub
stream. 1: main stream; 2: sub stream.
Display Mode
Click this button to select the display mode to display a single video on the
screen or display four videos on the screen at the same time.
Start/Stop All Streams
Click this button to start or stop all video streams.
Snapshot
Select the video you want to take a snapshot and then click this icon to take a
video snapshot.
Start/Stop Recording
Select the video you want to record and then click this icon to start or stop video
recording.
Zoom
Select single video display and then click once to enable zoom. When enabled,
click and drag the area on the picture to zoom in. Right click to resume 100%
zoom. Click the icon again to disable zoom. The zoom function works
screen mode as well.
© Copyright 2015 TRENDnet. All Rights Reserved.
Microphone
Select the video channel and then click on this button to start/stop talking
through the camera.
Speaker
Select the video channel and then click on this button to start/stop listening from
the camera. Use the slide below to adjust the volume.
PTZ Control
Click this button to bring up the PTZ user interface.
Pan and tilt
in full
Where can I find saved files?
Videos and snapshots captured from Live View will be saved to your computer. See
Live View Settings on page 104 for more details.
controls
Speed
TV-NVR104K
Zoom
Focus
Aperture (Iris)
Presets
Brightness
Contrast
Saturation
HUE
95
Advertisement
Table of Contents
