Table of Contents
Advertisement
TRENDnet User's Guide
Network
Set up NVR network, DDNS, NTP, Email, and UPnP settings.
General
Setup the network interface connecting to the Internet.
Network General Settings
NIC Type: Choose one of the Ethernet duplex and speed to
match your network. Default: 10/100M Auto
detection.
Enable DHCP: Check this box if the IP address is assigned by
DHCP server.
IPv4 Address: The IPv4 dynamic or static address
IPv4 Subnet
Network range of the subnet
Mask:
IPv4 Default
The default route going further from TV-IP320PI
Gateway:
IPv4 subnet
© Copyright 2015 TRENDnet. All Rights Reserved.
IPv6 Address 1: IPv6 self-assigned address including the subnet
prefix expression in the end of the string.
IPv6 Address 2: IPv6 static address including the subnet prefix
expression in the end of the string.
IPv6 Default
The default route going further from IPv6 subnet
Gateway:
MAC Address: The MAC address of the NVR network interface.
MTU: Maximum transmission unit. The maximum
field size in the Ethernet packet. Default: 1500
Preferred DNS: Enter your first IPv4 or IPv6 DNS server address
Alternate DNS: Enter your second IPv4 or IPv6 DNS server
address
Click Apply to apply the changes.
TV-NVR104K
48
Advertisement
Table of Contents
