TRENDnet User's Guide
Motion Detection
Set up how the motion detection event will be triggered and what actions
will be triggered.
Note: Please reference compatible camera list for more details.
Camera: Click to choose the camera you want to change the
settings.
Enable Motion
Check this box to enable motion detection. Click
Detection:
Apply to apply the choice.
Settings:
Setup the motion detection detail.
Sensitivity: Move the slider to adjust detection sensitivity. Sliding
to the right means the motion event is easier to be
triggered.
Draw Area: Click and drag on the area you want to set up the
motion detection or click Full Screen for the whole
image area. The red grids represent the motion
detection area.
Click Clear to clear the motion detection areas.
© Copyright 2015 TRENDnet. All Rights Reserved.
Motion detection settings
Click Settings to bring out the detailed set up menu.
Trigger channel
By default, a motion detection generated by the camera will only trigger
the events on that channel. If you want to trigger event on other channels,
select the channel number or select All for all channels.
TV-NVR104K
38