Table of Contents
Advertisement
TRENDnet User's Guide
Live View
Change the live view settings.
General
Live view general settings
Video Output
The video output interface is VGA or HDMI
Interface:
Live View
Choose the default Live View mode to be 1x1
Mode:
single video on the screen or 2x2 four video on
the screen at the same time. Default: 2x2.
Dwell Time: Set up how long each display will be showed up
on the screen. There's no effect on 2x2 display
mode. On 1x1 mode, each video will be shown on
the screen for Dwell Time and then change to the
next video. Default: 10 seconds.
Enable Audio
Enable or disable audio output on the NVR.
Output:
Default: disabled
Event Output: Define where the video is going out when event
triggered. The TV-NVR104 is set to both VGA and
HDMI.
© Copyright 2015 TRENDnet. All Rights Reserved.
Full Screen
When event triggered full screen display, who
Monitoring
long the video is going to stay on the screen.
Dwelling Time:
Default: 10 seconds.
Click Apply to apply the changes.
TV-NVR104K
52
Advertisement
Table of Contents
