Table of Contents
Advertisement
TRENDnet User's Guide
Arming Schedule
Edit: Click Edit to edit the recording schedule. The Edit
Schedule window will pop up.
3. Select day of the week you want to edit.
4. Select All Day or Customized schedule of
the day.
5. Set the time period and the event you want
to trigger the video recording continuous
(always recording) or motion detection.
6. Click Select All or the weekday you want to
have the same schedule on different day.
7. Click another day of the week by clicking on
its tab to set the next schedule. Click OK
when you have finished your settings.
© Copyright 2015 TRENDnet. All Rights Reserved.
Notification
Full Screen
Switch the video on the VGA/HDMI monitor to
Monitoring:
the camera detected motion event.
Audible
Activate the audible on board buzzer.
Warning:
Send Email: Send email to notify the system manager.
Trigger
Use this motion event as the trigger to invoke
channel:
actions in other channels.
Click Save to save the changes
TV-NVR104K
114
Advertisement
Table of Contents
