Table of Contents
Advertisement
TRENDnet User's Guide
11. The Live View page will show up and begin streaming video.
Note: If you were not go through the basic setup, the camera plug-and-play process
will begin after you setup the password. Wait a few minutes and press F5 to refresh
the browser for the live video.
© Copyright 2015 TRENDnet. All Rights Reserved.
Logging-in to the Camera for the First Time (OS X)
1. Open the web browser on your computer. In the address bar, enter
the IP address of the camera 192.168.10.60. (If you have a DHCP
server on your network, the IP address will be assigned dynamically.
For example, if you have a home gateway on your network and you
plug-in the camera on the same network, then you can find the camera
IP address on your home gateway), and then press Enter.
2. Enter the user name, admin, and the default password, admin, and
then click OK.
TV-NVR104K
88
Advertisement
Table of Contents
