Classifier Global Setting Configuration; Classifier Example - ZyXEL Communications GS3700 Series User Manual

Table 83 Common IP Ports
PORT NUMBER
80
110

19.4.1 Classifier Global Setting Configuration

To view a summary of the classifier configuration, scroll down to the summary table at the bottom
of the Classifier screen. To change the settings of a rule, click a number in the Index field.
Note: When two rules conflict with each other, a higher layer rule has priority over a lower
layer rule.
Figure 135 Advanced Application > Classifier > Classifier Configuration > Classifier Global Setting
The following table describes the labels in this screen.
Table 84 Advanced Application > Classifier > Classifier Configuration > Classifier Global Setting
LABEL
Match
Order
Logging
Active
Interval
Apply
Cancel

19.5 Classifier Example

The following screen shows an example of configuring a classifier that identifies all traffic from MAC
address 00:50:ba:ad:4f:81 on port 2.
Chapter 19 Classifier
PORT NAME
HTTP
POP3
DESCRIPTION
Select manual to have classifier rules applied according to the weight of each rule you
configured in Advanced Application > Classifier > Classifier Configuration. Alternatively,
select auto to have classifier rules applied according to the layer of the item configured in the
rule. Layer-4 items have the highest priority.
Select this to create a log when packets match a classifier rule during a defined time interval.
Select the length of the time period (in seconds) to count matched packets for a classifier rule.
Enter an integer from 0-65535. 0 means that no logging is done.
Click Apply to remove the selected entry from the summary table.
Click Cancel to clear the Delete check boxes.
GS3700/XGS3700 Series User's Guide
194