Dscp Profile - ZyXEL Communications GS3700 Series User Manual

Table 171 IP Application > DiffServ > 2-rate 3 Color Marker (continued)
LABEL
Apply
Cancel

38.3.2 DSCP Profile

Use this screen to create DSCP profiles. To open this screen, click the DSCP Profile link in the IP
Application > DiffServ > 2-rate 3 Color Marker screen.
Figure 271 IP Application > DiffServ > 2-rate 3 Color Marker > DSCP Profile
The following table describes the labels in this screen.
Table 172 IP Application > DiffServ > 2-rate 3 Color Marker > DSCP Profile
LABEL
Profile Name
DSCP
Green
Yellow
Red
Add
Cancel
Profile Name
Green
Yellow
Red
Chapter 38 Differentiated Services
DESCRIPTION
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
Enter a descriptive name for the profile for identification purposes.
Use this section to specify the DSCP values that you want to assign to packets based on
the color they are marked via TRTCM.
Specify the DSCP value to use for packets with low packet loss priority.
Specify the DSCP value to use for packets with medium packet loss priority.
Specify the DSCP value to use for packets with high packet loss priority.
Click this to create a new entry or to update an existing one.
This saves your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation
panel to save your changes to the non-volatile memory when you are done configuring.
Click this to reset the fields to your previous configuration.
This field displays the descriptive name of the profile. Click the profile name to change
the settings.
This field displays the DSCP value to use for packets with low packet loss priority.
This field displays the DSCP value to use for packets with medium packet loss priority.
This field displays the DSCP value to use for packets with high packet loss priority.
GS3700/XGS3700 Series User's Guide
366