Installing Software; Charging Battery; Switching On Dictation Microphone - Grundig Digta CordEx Operating Instructions Manual

The green LED [3] on docking station blinks as soon as dock-
ing station of Digta CordEx is properly recognized by the PC.

Installing software

NOTE
d
Recording and playback of dictations with Digta
CordEx requires dictation software to be installed
on the PC, e.g. DigtaSoft or DigtaSoft Pro by
Grundig Business Systems. For additional install-
ing information, see operation instructions of dicta-
tion software.

Charging battery

Prior to initial use, the battery of the dictation microphone must be
charged. Optionally, the dictation microphone can be supplied with
power by means of USB adapter (see section "Connecting dicta-
tion microphone directly to PC").
Place dictation microphone [1] into docking station [2].
►
The orange LED [4] indicates that battery is being charged.
When LED goes out, the battery is completely charged.
NOTE
d
The charging process does not start immediately,
rather after several minutes.

Switching on dictation microphone

Press On/Off button [8] on right side of dictation microphone
►
[1] and hold until company logo appears in display [17] .
On docking station [2] the green LED [3] signals the successful
registration of the dictation microphone at docking station by
continuous illumination.
Start-up