Insert battery to be charged completely into receiver of docking
►
station in reverse direction of arrow.
The orange LED indicates that battery is being charged. When
LED goes out, the battery is completely charged.
NOTE
d
The battery on the docking station is only charged
if dictation microphone is not located in docking
station. Otherwise the battery in dictation micro-
phone is charged first.
The charging process does not start immediately,
rather after several minutes.
Setting up function buttons
Function buttons F1 to F3 [11-13] can be assigned with spe-
cial functions. Set-up is performed via software AdapterServer.
Depending on applied dictation software, assignment of function
buttons can vary.
NOTE
d
For additional set-up information, see operating
instructions of dictation software.
Controlling dictation microphone via foot control
The dictation microphone can be operated by means of a foot
control (optionally available). This allows the control of dictation
microphone functions without the use of hands.
Connecting foot control
Plug connection cable of foot control into the provided connec-
►
tion jack [23] on back of docking station.
Extended operation
1