Troubleshooting
Electrical devices can experience malfunctions. This must not always concern a fault on the device. Thus, based on the following table,
check if you can eliminate the malfunction yourself.
Malfunction
Device does not switch on.
Device does not respond to
input commands.
No sound audible, or too low.
Sound distorted or too loud.
Possible cause
Battery empty.
Power supply interrupted.
Wireless connection to docking
station interrupted.
Microphone or playback vol-
ume incorrectly set.
Microphone or playback vol-
ume incorrectly set.
Repair
Charge or replace battery.
Check power cable for correct fit and
cable breaks.
Check wireless connection. Symbol for
wireless connection must continuously illu-
minate.
Switch device off and on again.
Set volume in dictation software.
Set volume in dictation software.
Troubleshooting