Table of Contents
Advertisement
Extended operation
Using foot control
The foot control assumes the following functions:
Left pedal
Function of slide switch [14].
■
(Rewind)
i
Middle pedal
Function of red [16]/blue button [10].
■
(Recording)
g
To record a new dictation, press down middle pedal until dicta-
►
tion software starts a new dictation.
1
To switch to recording mode, briefly press down middle pedal.
►
NOTE
d
Depending on applied dictation software, function
of the foot control can vary.
Right pedal
Function of slide switch [14].
■
(Stop)
e
■
(Start)
f
Connecting barcode/RFID reader
The dictation microphone is designed for connection of a barcode
or RFID reader. This allows identification of dictations by a code.
For connection, the existing cover strip must be replaced. The
device is equipped with a special cover strip that leaves the con-
nection channel for accessory devices open and supports the bar-
code/RFID reader.
Remove existing cover strip [19] from dictation microphone [1].
►
Advertisement
Table of Contents
