Start-up
NOTE
d
To conserve the battery, the device switches to
sleep mode if no button is pressed on the dictation
microphone for an extended time. By pressing any
button, the device becomes operational again.
If device is not used for an extended time, it switch-
es off completely.
Setting language
The dictation microphone features a system menu for internal
settings.
During initial start-up, it is practical to set the display language.
Additional configuration options via system menu are described in
section „Settings in system menu" .
Briefly press On/Off button [8] on dictation microphone [1] until
►
the text Menu appears at bottom left of display text.
Press blue button Menu [10].
►
Move selection (marker) from one menu item to the next via
►
the yellow button (up) [15] and F3 button (down) [13] on dicta-
tion microphone .
10
Select entry Language and press red button OK [16].
►
The corresponding submenu appears.
Select desired language and press red button OK.
►
Press blue button CANC to exit system menu.
►