Table of Contents
Advertisement
Extended operation
NOTE
d
Renewed registration is only required if dictation
microphone has been disconnected from dock-
ing station for an extended time. Otherwise it is
sufficient to switch on the dictation microphone
in reception area of docking station to establish
connection.
Permanent registration at a docking station
If several docking station are in close proximity (e.g. in one room),
the dictation microphone may only be connected to one selected
station when switched on.
Switch on dictation microphone [1] near the permanently
►
assigned docking station [2].
The dictation microphone registers in variable mode at the
docking station.
In system menu, set option Station allocation to Static pair.
►
(see section „Settings in system menu").
The dictation microphone is now permanently linked to the
docking station and connects with it every time it is switched
on.
20
NOTE
d
The setting can only be reversed by means of the
permanently assigned dictation microphone.
Installing firmware update
Firmware updates contain important manufacturer changes to the
functions of Digta CordEx. New firmware is offered online at www.
grundig-gbs.com. Downloads require an internet connection.
CAUTION!
b
Prior to an update check if a firmware with a higher
version number is available.
Do not interrupt the update process! Incomplete
firmware could make the device inoperative.
Switch on dictation microphone [1] .
►
Check firmware version in dictation microphone (see section
►
„Settings in system menu").
If a new firmware version for Digta CordEx is available online,
►
download the corresponding file onto the PC.
Advertisement
Table of Contents
