Remote Antenna Installation Kit; Marathon Vehicle Dock Technical Specifications - Honeywell Marathon Reference Manual

Remote Antenna Installation Kit

The external GPS antenna is an adhesive mount antenna.
The Remote Antenna Installation Kit consists of the antenna and an integrated cable. The remote antenna is mounted on the
top of a forklift, truck or other vehicle and cabled to the Marathon dock inside the vehicle.
1. Locate a mounting position on highest point on the vehicle, following these precautions:
The antenna must be mounted so the antenna is not damaged while the vehicle or any of its parts are
l
moving.
2. Clean the area where the antenna is to be mounted.
3. Remove the protective backing paper from the adhesive on the antenna and position the antenna on the vehicle.
4. Attach the connector on the coaxial cable to the antenna connector on the vehicle mounted Marathon dock.
5. Use cable ties to secure the coaxial cable to the vehicle as necessary. Make sure the cable is routed so it is not
damaged by any moving parts of the vehicle.

Marathon Vehicle Dock Technical Specifications

Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Vibration
Shock
IP Rating
Weight
Dimensions
Ports
-20°C - 50°C (with Marathon in dock)
5 to 95% non-condensing
-30°C- 60°C degree
5 to 95% non-condensing
5G (w/ SSD)
30G (w/ SSD)
IP55 design
4 lb 4.7 oz / 1.95 kg
Width 9" / Length 6" / Height 7.5"
Width 22.8 cm / Length 15.2 cm / 18.8 cm
Power, 9 pin serial, 15-pin serial, Ethernet/USB, GPS antenna, Mobile Net antenna
3-13