Connecting A Cigarette Lighter Power Adapter; Connect To Vehicle Mounted Dock; Connect To Marathon - Honeywell Marathon Reference Manual

Connecting a Cigarette Lighter Power Adapter

Note: The Honeywell-approved Cigarette Lighter cable is intended for use in 12V DC negative ground systems only

Connect to Vehicle Mounted Dock

Honeywell Product ID: FX1312PWRSPLY, Power Supply, 12V -12V Vehicle Adapter
1. Plug the lighter end of the cordset into an appropriate automotive cigarette lighter receptacle. The LED on the cigarette
lighter power adapter illuminates to indicate it is drawing power from the vehicle.
2. Connect the dock end of the power cable to the vehicle dock Power port.
3. The Power LED on the front of the vehicle dock illuminates when it is receiving power from the vehicle battery.
4. When the Marathon is in the powered vehicle mounted dock, the Marathon Battery Status LED at the upper left, next to
the display, illuminates orange to indicate the Marathon battery is recharging by drawing vehicle power through the
vehicle mounted dock.

Connect to Marathon

This vehicle adapter is designed for situations when a vehicle mount dock is not used and the Marathon requires vehicle power.
Honeywell Product ID: FX1311PWRSPLY, Power Supply, 12V -19V Vehicle Adapter
1. Plug the lighter end of the cordset into an appropriate automotive cigarette lighter receptacle. The LED on the power
supply illuminates to indicate it is connected to vehicle power.
2. Plug the barrel connector end of the cordset into the Marathon Power port.
3. When the Marathon is receiving power from the vehicle, the Battery Status LED at the upper left, next to the Marathon
display, illuminates orange to indicate the Marathon battery is recharging.
3-10