Assemble/Attach The Ac Power Adapter - Honeywell Marathon Reference Manual

Assemble/Attach the AC Power Adapter

Note: Connect an assembled cable to the dock first, then to an AC source.
The external Power Supply for the dock is shipped with the dock. Contact
The Power port is located on the back of the dock.
1. Connect the detachable cordset (1) provided by Honeywell (US only, all others must provide their own cable) to the
external power supply (IEC 320 connector).
2. Plug cordset into appropriate, grounded, electrical supply receptacle (AC mains).
3. The LED on the AC adapter illuminates.
4. Firmly press the dock end (2) of the power assembly into the 4-pin Power port on the back of the dock.
5. The Power LED on the front of the dock illuminates.
AC power is now being supplied to the AC power adapter and the desktop dock.
The desktop dock is ready for use.
Note: The desktop dock AC/DC adapter can also be used to supply power to a Marathon battery charger.
2-4
Technical Assistance if there is no AC cable.
1. AC Input Connector (US only)
2. Dock end (DC Output
Connector)