Logging-In To The Camera - TRENDnet TV-IP430PI User Manual

TRENDnet User's Guide

Logging-in to the Camera

1. Open the web browser on your computer. In the address bar, enter the IP
address you setup through the setup CD or 192.168.10.30. (If you have a DHCP
server on your network, the IP address will be assigned dynamically. For
example, if you have a home gateway on your network and you plug-in the
camera on the same network, you can find the camera's IP address on your
home gateway.), and then press Enter.
2. Enter the user name, admin, and the password you setup through the setup CD
or the default password, admin, and then click OK.
If the camera was not setup through the CD and you are accessing it the first
time, you will be prompted to change password automatically.
© Copyright 2015 TRENDnet. All Rights Reserved.
3. The camera management page will detect if you installed the camera video
streaming plug-in or not. Click the link to download the plug-in from the
camera.
Permission request depends on the Internet security settings of your computer.
Click Run to install the plug-in.
Note: for Mac systems, the plug-in file is stored on the CD or you can download the
latest version from
http://www.trendnet.com/downloads/camera/mac/WebComponents.zip
TV-IP430PI
8