Cables; Warnings; Cautions - TRENDnet TV-IP430PI User Manual

TRENDnet User's Guide
ONVIF
ONVIF compliant
Complimentary Software
Complimentary pro-grade software to manage up to 32 TRENDnet cameras
Complimentary Apps
Live video to a mobile device with free iOS and Android™ apps

Cables

Connectors for AC
power adapter
(Not required when PoE
injector is included)
Audio Line in, line out,
and grounding wires
Network cable
connection
© Copyright 2015 TRENDnet. All Rights Reserved.

Warnings:


It is recommended to use the PoE+ injector or an IEEE 802.3at compliant PoE+
switch.

If the product does not work properly, please contact your dealer or the nearest
service center. Never attempt to disassemble the camera yourself. Disassembling
the product will void the warranty and may cause harm or injury.

The installation should be done by a qualified service person and should conform
to all construction and electric regulations and other local codes.

Cautions:


Make sure the power supply voltage is correct before using the camera.

Do not drop the camera or subject to physical shock.

Do not touch sensor modules with fingers. If cleaning is necessary, use a clean
cloth with a bit of ethanol and wipe it gently. If the camera will not be used for an
extended period of time, put on the lens cap to protect the sensor from dirt.

Do not aim the camera lens at the strong light such as the Sun or an incandescent
lamp. Strong light can damage the camera sensor.

The sensor may be burned out by a laser beam. When any laser equipment is
being used, make sure that the surface of the sensor will not be exposed to the
laser beam.

Do not place the camera in extremely hot, cold temperatures (the operating
temperature should be between -30°C to 65°C), dusty or damp environment, and
do not expose it to high electromagnetic radiation.

To avoid heat accumulation, good ventilation is required for a proper operating
environment.

While shipping, the camera should be packed in its original packing.

Use water proof tape to cover all the wires, cables which will be exposed outdoor
after the camera installation.
TV-IP430PI
3