Table of Contents
Advertisement
TRENDnet User's Guide
Network Storage
No:
The sequential number of the network storage.
Type:
The type of storage.
Server Address:
Enter the IP address of your network storage.
File Path:
Enter the file path on the server for network
storage.
Capacity:
Enter the size of the disk space you want to assign
for this storage. The minimum disk space
requirement is 8GB. If you do not want to limit the
size and use the full physical disk space, enter 0 in
this field.
File System:
Choose between NFS or CIFS for file system. If you
assign the network storage on a Windows®
computer, set it to SMB/CIFS. (if you use an
anonymous account, please still enter a random
user ID and password before saving)
User Name:
Enter the user name if the network storage
requires authentication. Leave it blank if no
authentication is required.
Password:
Enter the password to access the network
storage.
Tip: To create network storage on your Windows®
based system, create a shared folder and then
test your set up with another computer. Enter the
IP address of the computer here and enter the
shared folder name with a leading forward slash.
For example, if you have a shared folder named
"SMB", enter "\SMB" in the File Path.
Click Save to save the changes
© Copyright 2015 TRENDnet. All Rights Reserved.
FTP Server
FTP
Enable Snapshot to FTP:
Check this box if you want to store snapshots on
the FTP.
Server Address:
Enter the FTP server IP address.
Port:
Enter the service port number of the FTP server.
User Name/Anonymous:
Check Anonymous if the FTP server does not
require authentication. Enter the User Name if
the FTP server requires authentication.
Password:
Enter the password of the FTP account.
Confirm:
Enter the password again to make sure the
password was entered correctly.
Directory Structure:
When saving snapshots on an FTP server, they can
be saved in a single place or organized with
TV-IP430PI
45
- Quick Links:
- Restore Default Password
Hide quick links:
Advertisement
Table of Contents
