Pattern - TRENDnet TV-IP430PI User Manual

TRENDnet User's Guide
4. Click to save a preset into the patrol.
5. Repeat the steps from 3 to 5 to add more presets.
6. Click to save all the patrol settings.
Calling a Patrol route
In the PTZ control panel, select a defined patrol from
to call the patrol.
Buttons on the Patrol interface:
Buttons Description
Save a patrol
Call a patrol
Stop a patrol
Add a preset to a patrol path
Modify a preset
Delete a preset
Delete all the presets in the selected patrol path
© Copyright 2015 TRENDnet. All Rights Reserved.

Pattern

A pattern is a memorized series of pan, tilt, zoom, and preset functions. A pattern can
be called in the pattern settings interface. There are up to 4 patterns available for
customization.
Configure a Pattern
and click
1. In the PTZ control panel, click
2. Select a pattern number from the list as shown in Error! Reference source not
found..
3. Click to enable recording the panning, tilting and zooming actions.
4. Use the PTZ control buttons to move the lens to the desired position after the
information of PROGRAM PATTERN REMAINNING MENORY (%).
• Pan the speed dome to the right or left.
• Tilt the speed dome up or down.
• Zoom in or out.
• Refocus the lens.
TV-IP430PI
to enter the pattern settings interface.
13