In Charger Functions - Avaya 3740 User Manual

In charger functions

In charger actions when in call
You can end a call, or turn on the loudspeaker by putting the telephone in a charger during a
call.
1. Select In charger.
2. Select Call behavior.
3. Select one of the following:
No action – No action will be performed when the telephone is placed in charger
●
duringa a call.
Loudspeaking – The loudspeaker will be turned on when the telephone is placed in
●
charger during a call. The loudspeaker will be turned off when removing the telephone
from charger.
End call – The ongoing call will be disconnected when the telephone is placed in
●
charger.p
Redirecting calls and messages when telephone is placed in charger
You can redirect calls to another extension when the cordless telephone is placed in a charger.
Then the telephone does not ring when receiving a call. The function is automatically cancelled
when you remove the telephone from the charger.
1. Select In charger.
2. Select Other actions.
3. Select Redirect.
Note:
The function and the extension must be programmed in the PBX to be able to
Note:
redirect calls.
Turning off the telephone while charging
You can set the cordless phone to switch off when you place the cordless telephone in the
charger while it is charging. When you remove the cordless phone from the charger, the phone
is switched on again.
1. Select In charger.
2. Select Other actions.
3. Select Switch off.
Change Profile
You can configure the cordless telephone to change the profile when placed in the charger.
When it is removed from the charger it will switch back to the previous profile.
64
Avaya 374x DECT Telephones - User Guide 3/2013