Rackmount Charger; Multiple Battery Charger; Icons And Text In The Display - Avaya 3740 User Manual

Telephone charging
1. Place a cordless telephone in the charging slot to start charging.
Telephone disconnection
1. Tilt the telephone forwards you.
2. Then, lift the telephone upwards.
Note:
Do not try to lift the telephone upwards before tilting it forwards.
Note:

Rackmount Charger

The Rackmount Charger is used for charging several telephones, to synchronize parameters,
and for software download.
The built in power supply can charge up to six cordless telephones.
See Installation and Administration Manual, IP DECT.

Multiple Battery Charger

The Multiple Battery Charger is used for charging up to six spare batteries.

Icons and text in the display

All functions and settings available to the user are shown as icons and text in the display. The
icons and text in the display indicate functions and settings to which you have access. The
display normally displays date and time, the Owner ID and telephone number. The Owner ID
can manually be set by the user.
Figure 3: Example of a display configuration in idle mode
12:00
01/01/2010
System A
123456
Menu
28
Avaya 374x DECT Telephones - User Guide
1
2
3
4
5
3/2013