Set The Lcd Timeout; Set The Lcd Brightness; Software And Reset Tab - NETGEAR FUSE User Manual

1. In the Mobile Hotspot Manager, click Settings > General > Device.
2. Beside the Default Language, select English or Español.
3. Click Submit.
Temporarily Set the Mobile Hotspot Manager Language
You can temporarily change the language used to display the Mobile Hotspot Manager on your computer.
If you close the browser completely, the next time you open the Mobile Hotspot Manager, the default
language will be used.
■
In the language box at the top right corner of the screen, select the language to use temporarily.

Set the LCD Timeout

Use this feature to select the delay times before the LCD automatically turns off while running on battery
power, connected to the AC charger, or tethered via USB.
You can adjust these settings on the Mobile Hotspot Manager's Settings > General > Device page.
Note: The LCD turns on if an alert occurs.
1. In the Mobile Hotspot Manager, click Settings > General > Device.
2. Beside the timeouts you want to set (Timeout on Battery, Timeout on AC, Timeout on USB),
select the desired timeout periods. (A smaller value helps prolong the battery life.)
3. Click Submit.

Set the LCD Brightness

Use this feature to adjust your screen's brightness to suit your surroundings and to prolong the battery
life.
You can adjust this setting on the Mobile Hotspot Manager's Settings > General > Device page.
1. In the Mobile Hotspot Manager, click click Settings > General > Device.
2. Beside Screen Brightness, select the desired brightness level (Bright or Dim). (Choose Dim to
prolong the battery life.)
3. Click Submit.

Software and Reset Tab

From this tab, you can save your current device settings and restore them later, update your software,
reset your device to default settings, and set your device startup options.
Mobile Hotspot Manager (Browser) Interface
DRAFT
42