Cannot Connect Through Usb; Cannot Display The Home Page - NETGEAR FUSE User Manual

●
Your computer supports the type of WiFi security that the network is set to use.
Note: All the devices used with the NETGEAR Fuse Mobile Hotspot must support the selected security
type.
●
Your computer supports WiFi 802.11g (if Connection Rate is set, in the
802.11g only).
●
Your computer has not been blocked through MAC filtering. (See
Filtering).)
Tip: If some settings are preventing you from connecting to WiFi, connect to your device through the
micro-USB cable, and then change the settings. (See

Cannot Connect Through USB

If your computer cannot connect to the NETGEAR Fuse Mobile Hotspot through the micro-USB cable, go
through the following steps.
●
Make sure that you've installed the device driver, as described in

Cannot Display the Home Page

Your Web browser may display an error message when you try to display the home page. The error
message depends on your Web browser.
●
"Could not connect to remote server" (Opera)
●
"Internet Explorer cannot display the webpage" (Internet Explorer)
●
"Oops! This link appears to be broken" (Google Chrome)
●
"Safari can't open the page" (Safari)
●
"The connection has timed out" (Firefox)
Check the following:
●
Your device is turned on. (See
●
You have established a connection to your device (through WiFi or through the micro-USB cable).
●
Make sure you're typing the correct address in the Web browser.

If the home page is still not displayed, try
settings, replace "192.168.1.1" with the appropriate IP address.
●
The Web browser is a recent version, and Java-enabled. The following are recommended:

Internet Explorer

Mozilla Firefox

Google Chrome™ (version 17 or later)
Appendix
Turn Your Device On and
®
(version 8.0 or later)
®
(version 4.0 or later)
DRAFT
Manage the Block List (MAC
Connect with the Micro-USB
Making a Tethered
Off.)
http://192.168.1.1 or, if you're using custom routing
WiFi Options Tab to
Cable.)
Connection.
71