Export Settings; Import Settings - NETGEAR FUSE User Manual

Item Description
●
●
Reset
●
Select the checkbox to install tethering drivers (if needed) when device is
Startup options
connected via USB to a Windows or Mac system. See TRU-Install.

Export Settings

Settings include configuration information for your device, network, and Mobile Hotspot Manager
interface.
You can, for example, export (save) the current configuration, and then make some changes and test
them. You can then import (restore) the saved configuration.
To export the settings to a text file:
1. In the Mobile Hotspot Manager, click Settings > General > Software and Reset.
2. In the Download / Backup Settings section, click Save.
3. Save the file to an appropriate location in your computer. By default, the file (export.cfg) is saved
to your Downloads folder.

Import Settings

This feature lets you restore a saved configuration.
1. In the Mobile Hotspot Manager, click Settings > General > Software and Reset.
2. In the Restore Settings section, click Choose File or Browse (the button name depends on the
browser you are using).
3. Navigate to the folder where your previously saved configuration file is stored.
4. Select your configuration file and click Open to restore your device with the imported settings.
Note: Your device may reset, and you may need to reconnect to WiFi and the Internet. (See
with WiFi (WLAN).)
Mobile Hotspot Manager (Browser) Interface
Factory Reset – Click to reset your device to factory default settings
and clear your account details. See
do this with assistance from your Internet service provider.)
Settings Reset – Click to reset your device to factory default settings,
but leave your account details unchanged. See
Clear Programming – Click to clear your account details. See
Your Device.
DRAFT
Reset Your Device. (You can only
Reset Your Device.
Reset
Connect
44