Installing Your Dvd Recorder - Magnavox MRV640 Owner's Manual

D
After you have successfully connected the DVD Recorder and other devices to your TV (as
described in the previous chapter), this chapter will help you start the initial installation. The
DVD Recorder automatically seeks and stores all available TV channels.
If you have connected additional devices (satellite receiver,..). via the RF
coaxial cable, switch them on now. The automatic channel search will
recognize them and save them.
If you are only using the DVD Recorder as a playback device or you
only have a satellite receiver connected, you still need to perform the
initial installation. This is necessary so the basic settings can be saved
correctly. After the initial installation is completed once, you can use the
DVD Recorder normally.
1
Select the desired language for the on-screen menu by pressing
B or A .
The multi-language on-screen menu takes the mystery out of using your
new DVD recorder. All settings and/or functions are displayed on your
TV screen in one of the available languages (English, French, or Spanish).
2
Confirm with OK .
3 Select the desired audio language using B or A .
The DVD audio will play in the selected language if it is available. If this
language is not available on the DVD, the audio will play in the first
language on the DVD. The DVD disc menu will appear in the selected
language if it is available on the disc.
4
Confirm with OK .
5 Select the desired language for the subtitles by pressing B or
A .
DVD subtitles will be in the selected language if it is available. If this
language is not available, subtitles will be in the first language on the
DVD.
6
Confirm with OK .

Installing your DVD recorder