Magnavox MRV640 Owner's Manual page 25

This connecting cable, also known as the SVHS cable, is used to transmit the brightness signal (Y
signal) and color signal (C signal) separately. This mini DIN jack/plug is also called a Hosiden
jack/plug.
Have the following cables ready:
an RF coaxial cable (1, supplied), a power cable (2, supplied), an S-video (SVHS) cable (3), an
audio cables (4, with red/white ends).
1
Remove the antenna or Cable TV signal from your TV. Insert it
into the ANTENNA IN jack at the back of the DVD recorder.
2
Connect one end of the supplied RF coaxial cable to the TV
OUT jack at the back of the DVD Recorder and connect the
other end to the antenna input jack on TV.
3
Connect an S-Video (SVHS) cable to the S-VIDEO (Y/C)
OUT jack at the back of the DVD Recorder and to the S-Video
(SVHS) In jack of the TV (usually called S-Video in or SVHS in.
See your TV's instruction manual).
4
Connect an audio cable to the red/white AUDIO L/R OUT jacks
at the back of the DVD Recorder (next to S-VIDEO (Y/C)
OUT ) and to the corresponding red/white audio input jacks of
the TV (usually called 'Audio in', 'AV in'. See your TV's instruction
manual).
5
Switch on the TV. Select the corresponding S-Video Input
channel. For the channel number, please see your TV's instruction
manual.
Connecting the DVD Recorder