Magnavox MRV640 Owner's Manual page 26

6
Connect the
4MAINS at the back of the DVD Recorder and to a power
supply.
The most important features of the DVD Recorder will appear
on the display.
After the initial installation is completed, this function will be
switched off. To switch on this function again, read in the section
'Standby' in the chapter 'User preferences'.
7
Press STANDBY-ON m on the recorder. '
appear on the display.
Then, read 'Initial installation' in the chapter 'Installing your DVD recorder'.
supplied power cable to the mains jack
' will
Connecting the DVD Recorder