Table of Contents
Advertisement
Parts Identification
Front Panel
1 POWER switch
2 UTILITY button
3 Monitor indicators
d VOLUME control
1 Display (see page 12)
5 PHONES terminal
2 Controls (see page 13)
a POWER switch
Turns the receiver on or off.
Set to the \ position to turn the receiver on. Set to the a
position when turning off the main power supply.
Note
When DC power is being input, you cannot turn off the
power supply using this switch. To turn off the power
supply in such cases, turn off the connected external power
supply, or disconnect the connected cable.
b UTILITY (UTILITY menu) button
Press to display UTILITY menu. This button lights up
brightly during UTILITY menu operation.
c Monitor indicators
One of four indicators lights up corresponding to the
VOLUME control operation.
1/2: Audio from channel 1 is output from the L channel of
the headphones and audio from channel 2 is output from
the R channel.
1: Audio from channel 1 is output from the L and R
channels of the headphones.
2: Audio from channel 2 is output from the L and R
channels of the headphones.
1+2: Audio from channel 1 and 2 are mixed to be output L
and R channels of the headphones.
d VOLUME (monitor channel selection/monitor
volume) control
Press to change the audio output from the headphones.
Rotate to control monitor volume.
e PHONES (headphones) terminal
Connect the headphones here.
11
Parts Identification
Advertisement
Table of Contents
