Parts Identification - Sony DWR-S03D Operating Instructions Manual

Compact, lightweight, tough design
A magnesium die-cast and aluminum housing make the
unit compact and lightweight. This makes for a balanced
construction when installed on the camcorder. Because
this item is expected to be used outdoors, it features a
tough, dust-resistant construction with level II equivalent
splash-resistant performance.
* To ensure sufficient splash-resistant performance, use all mounting screws
to securely attach the receiver to other devices.
Easy-to-see, full dot-matrix OLED (Organic
Light-Emitting Diode) display
The quick response of the OLED display enables real-time
operating conditions to be displayed clearly and
accurately.
Camcorder rear mount
Using the DWA-01D digital wireless adapter (sold
separately) makes it possible to mount the transmitter on
the rear of a shoulder camcorder. Using a camcorder with
an AES/EBU input terminal makes full digital audio
recording possible. Also, using two receivers enables four-
channel wireless microphone operation.

Parts Identification

*
When the DWA-SLAS1 digital wireless adapter is attached
a Antenna and antenna connector (SMA type)
Connect the supplied antenna here.
b Bracket attachment screw hole
This is used to attach the bracket included with the
DWA-SLAS1/SLAU1 digital wireless adapter (sold
separately).
The attachment screws are included with the
DWA-SLAS1/SLAU1.
c Slot attachment screw
These screws are attached to the bracket included with the
DWA-SLAS1/SLAU1 digital wireless adapter (sold
separately) and are used to attach the camcorder or
DWA-01D/F01D wireless adapter.
d Compatibility pin (Only when attached
DWA-SLAS1)
Prevents the attachment of an incompatible camcorder or
adapter.
e Bracket
This is supplied with the digital wireless adapter.
f Slot connector
Use to connect the receiver to a camcorder or DWA-01D/
F01D wireless adapter. Power, audio, and control signals
are sent through this connector.
4