Table of Contents
Advertisement
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your
authority to operate this equipment.
All interface cables used to connect peripherals must be
shielded in order to comply with the limits for a digital
device pursuant to Subpart B of Part 15 of FCC Rules.
If you have any questions about this product, you may call;
Sony Customer Information Service Center 1-800-222-
7669 or http://www.sony.com/
Declaration of Conformity
Trade Name:
SONY
Model:
DWR-R02D
Responsible party: Sony Electronics Inc.
Address:
16530 Via Esprillo, San Diego, CA
92127 U.S.A.
Telephone No.:
858-942-2230
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
For the customers in Canada
Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device
must accept any interference, including interference that
may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian
ICES-003.
Pour les clients au Canada
L'utilisation doit répondre aux deux conditions suivantes :
(1) ce matériel ne doit pas provoquer de brouillage et (2) il
doit accepter tout brouillage, même celui qui est
susceptible d'affecter son fonctionnement.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
This model has an RF module of the FCC/IC
approval built-in
BUILT IN MODULE RM-223
FCC-ID: AK8RM223
IC: 409B-RM223
You are cautioned that any changes or modifications not
expressly approved in this manual could void your
authority to operate this equipment.
For the customers in the U.S.A.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
IMPORTANT NOTE: To comply with the FCC RF
exposure compliance requirements, no change to the
antenna or the device is permitted,
Any change to the antenna or the device could result in the
device exceeding the RF exposure requirements and void
user's authority to operate this device.
This device complies with FCC radiation exposure limits
set forth for uncontrolled equipment and meets the FCC
radio frequency (RF) Exposure Guidelines in Supplement
C to OET65. This device has very low levels of RF energy
that it is deemed to comply without testing of specific
absorption radio (SAR).
For the customers in Canada
Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device
must accept any interference, including interference that
may cause undesired operation of the device.
The term "IC:" before the radio certification number only
signifies that Industry Canada technical specifications
were met.
Ce modèle dispose d'un module à
radiofréquence (RF) intégré qui a été certifié par
la FCC/IC.
3
Advertisement
Table of Contents
