Configuration Example of ST Remote System
The DWR-R02D controls the system with the wireless remote control function, by using the antenna attached to the REM
ANT connector on the rear panel.
Note
In the ST remote system, each DWR-R02D unit uses one channel of radio wave. When more transmitters are used in the
system, communication congestion may occur, resulting in slow response on the controlled devices. If you plan to use six
or more transmitters, operation in NT remote system using the optional RMU-01 is recommended.
22
System Configuration Examples
Up to six
transmitters
1)
DWR-R02D
Mixer or I/O box
1) Use of up to three DWR-R02D units is recommended.
UHF antennas
To DC power supply
To a wall outlet