Using The Cd-Roms - Sony DWR-R02D Operating Instructions Manual

Digital wireless receiver
Hide thumbs Also See for DWR-R02D:
Table of Contents

Advertisement

if trouble occurs during operation, so you can respond
quickly.
Rack mounting
The DWR-R02D can be mounted in an EIA standard 19-
inch rack (1U size). Solid all-in-one structure is adopted on
the screw brackets and side panels.
Two-way powering
A wide range of power-supply voltages from 100 to 240 V
AC is supported. A DC input is also included to enable use
in almost any environment.

Using the CD-ROMs

Supplied CD-ROM "Wireless Studio"
The supplied CD-ROM "Wireless Studio" includes the
following files.
Wireless Studio: Software that allows the status of the
DWR-R02D, RMU-01, and Sony digital wireless
transmitters to be monitored from the PC, in addition to
allowing remote control of settings for the DWR-R02D
and transmitters.
Wireless Studio User's Guide: This is a PDF file that
describes function and usage of the Wireless Studio. The
file can be viewed on the PC screen.
To use the Wireless Studio, the software must be installed
in the PC.
For details, see "Installing the software" on page 9.
Note
Always use the version of Wireless Studio that is stored on
the supplied CD-ROM. The DWR-R02D may not be
recognized if the older version of Wireless Studio is used.
Adobe Reader Version 6.0 or higher must be installed on
your computer in order to read the User's Guide contained
on the CD-ROM.
For details, see "Using the CD-ROM manual" on
page 10.
Operating conditions of the software
For details on operating conditions of the software, refer to
the Wireless Studio User's Guide stored on the supplied
CD-ROM "Wireless Studio."
Installing the software
Notes
• If the older version of Wireless Studio is already
installed in the PC, uninstall it (see page 10).
• Quit all applications before installing the software.
• Be sure to log in as the administrator.
Notes on installation
The installation procedure below describes the operation
on the PC that runs Windows 7. Note that the procedure
may vary according to the operating system.
1
Insert the CD-ROM "Wireless Studio" in your
CD-ROM drive.
9
Using the CD-ROMs

Advertisement

Table of Contents
loading

Table of Contents